This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Thanks Roger. I've been won over.=20 What methods do folks use to keep the water bath at 130 F? I have a = Rival Hot Pot (the one Bill Spurlock recommends). It has a little dial = guage that I have set to low. That was close to boiling, so I put the = little thingeemabobble thing in the plug that Schaff (or whoever) sells = for regulating the heat to a soldering iron for ironing key bushings and = whatnot (a reostat?). I set that on the lowest setting also, but the pot = held at a steady 140 F. Any recommendations? And I don't want to be = feeding it ice cubes every five minutes either! Thanks. Terry Farrell =20 ----- Original Message -----=20 From: jolly roger=20 To: pianotech@ptg.org=20 Sent: Tuesday, December 11, 2001 8:51 PM Subject: Re: Key Bushings & Hot Hide Glue Hi Terry, There will be no turning back, you are hooked. My = goodness another hot hide glue addict. Warning, you may start to find = lots of uses for it <G> Regards Roger ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/82/25/61/2f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC