---------------------- multipart/alternative attachment In a message dated 4/10/02 3:19:09 PM Central Daylight Time, mjbkspal@execpc.com writes: > Wim, > > I just ran into the same situation, not a Kawai studio, but a Weber grand. > Soaked with wallpaper paste remover, when the glue was soft, used the tip > of a screwdriver to push the folded-over part in from the outside, then > grabbed the top with tweasers as usual. If you've got something more > tenacious than hide glue, you may have to improvise some heat for the > pushing screwdriver tip. > > hope that helps, > > Mike Spalding, RPT > > Mike I used your method, and it worked very well. It was a tedious job, and it took me twice as long to remove all the bushings. But I got the job done. Thank you for the tip. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8d/13/41/33/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC