Newton Hunt wrote: > Richard, > > The height of the hammer center pin to the keybed was left out. String > height minus hammer center pin height equals bore distance. If those > specs are correct then you do indeed have a problem. > Ah... grin.. yes... Forgot to measure that didnt I. Ok... coming up !! :) > > 10 mm knuckles is correct. 11 mm is not correct. Well, optimum anyway. > > Newton -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC