---------------------- multipart/alternative attachment At 12:11 AM 8/11/2002 -0400, you wrote: >If it is in good condition, you can shim that cloth until you have your >lost motion generally taken up. Remember, that cloth should only be glued >with a bead of glue at the back end so that some veneer or thin cardboard >can be used to shim it to the proper height. <snip> Backrail cloth which is glued at the rear of the felt will cause noise upon key return. Glue along the front edge leaving the back free, shims can be place under that edge. Even on grand where the backrail felt has been glued front & rear over an underfelt, slice the rear glue joint and there will be a slight reduction in key noise. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/76/da/d9/85/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC