Impact Hammer

[Jarred Finnigan]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Devlon

I am interested in your impact hammer.  Any chance of sending a picture?
Please reply directly to my email address

jfinnigan@optusnet.com.au


Thanks

Jarred Finnigan
  -----Original Message-----
  From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of
BSHARPTUNE@AOL.COM
  Sent: Wednesday, 2 January 2002 1:25 AM
  To: pianotech@ptg.org
  Subject: Re: Impact Hammer


  I have a custom Renner/Keith Bowan model. This is the one that is made of
brass, stainless steel, and rosewood. Keith is known for making some of the
best tuning hammers in the industry.   Most of the Renner hammers are made
by him.   I was having severe shoulder problems and thought that susing an
impact hammer would help....it didn't.  My problem was caused by a bone spur
in my shoulder socket.  So, using the impact hammer did not help.  Mine cost
230.00, and is in pristine condition.  I will sell it for 190.00.

  Devlon

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/34/b4/a7/e6/attachment.htm

---------------------- multipart/alternative attachment--