This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Dale, I am back from the convention. Had a wonderful time. Goose Juice is = ready to ship.<G> Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Erwinspiano@AOL.COM=20 To: pianotech@ptg.org=20 Sent: Monday, June 24, 2002 7:25 PM Subject: Re: Slow hammer return In a message dated 6/24/2002 8:51:55 AM Pacific Standard Time, = chikring@midcoast.com writes: Subj:Slow hammer return=20 Date:6/24/2002 8:51:55 AM Pacific Standard Time From:chikring@midcoast.com Reply-to:pianotech@ptg.org To:pianotech@ptg.org Sent from the Internet=20 Wow , Arthur This subject has been round this list numerous times. You have a = rip snortin case of vertigris. The green grit, the green slim , the = factory gift that keeps on giving year after year. The short version is = nothing works long term. (No it probably wasn't the floor humidifier) = Short term, use whatever works remember it's ALL temporary. 1 to 12 = months or so. My latest favorite is goose juice from Joe Goss ant mother = Goose tools. Ask some one to post his address I don't have it on file. I hope this helps some. nahhhh Dale List, I have a customer with a 1921 Steinway Upright with very slow hammer = return, which I think was caused by a floor humidifier. I heated the = hammer butt centers with a hair dryer, which freed up the hammers for = about 1 hour. The questions is what do you think is the most reliable = way to free up sluggish hammers without replacing center pins or parts? = Should I use silicone and naptha, alcohol and methanol or install a = Dammp-Chaser heater bar with a humidistat? Thanks, Arthur ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20/dc/83/c3/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC