Pocket RCT pitch raise problem?

[Jason Kanter]

> This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

---------------------- multipart/alternative attachment
Sounds like it's a semitone off. Hearing your A as a G#.
..........
.  jason kanter . jkanter@rollingball.com . jason.kanter@wamu.net
.  manager . learning & performance development
.  consumer loan servicing . washington mutual bank
.  office 206 490 6708 . cell 425 830 1561
.  home (bellevue): 425 562 4127 . fax 425 562 4132
.  14847 ne 14th st . bellevue wa 98007
.  (orcas): 360 376 2799 . 136 perch tree lane . eastsound wa 98245
...............................

From: "Mike and Jane Spalding" <mjbkspal@execpc.com>
Reply-To: pianotech@ptg.org
Date: Tue, 9 Jul 2002 07:53:55 -0500
To: <pianotech@ptg.org>
Subject: Re: Pocket RCT pitch raise problem?


Tom,

Sorry, can't help.  I've only done one pitch raise since trading for Pocket,
but it worked just like it's supposed to.  A4 started at 429, PRCT gave me
positive overpulls, after first pass everything within 2 cents.

Mike


----- Original Message -----
From: <Tvak@AOL.COM>
To: <pianotech@ptg.org>
Sent: Tuesday, July 09, 2002 7:18 AM
Subject: Pocket RCT pitch raise problem?


> Anybody else have a problem with Pocket RCT's pitch raise function?  I get
> negative offset values on pitch raises.  In other words, it tells me to tune
> all the notes flat, with the target to the left of center.  For example, I
> sampled my Yamaha U1 just now and A4 reads 438.85.  In pitch raise mode, the
> target is to the left of center, and the offset is
> -1.38.  Each succesive note gives me a larger negative offset.
> 
> Of course, when the notes are flat I need to pull the notes sharp, and the
> target should be on the right with a positive offset reading.
> 
> With so few options I find it hard to believe I've toggled something the
> wrong way, but it's usually human error with these kind of things.
> 
> I am an experienced RCT user (laptop version) and I've never had this problem
> before.  Pitch raise settings are all at default except for "lowest plain
> wire string". 
> 
> Help, anyone? 
> 
> Tom Sivak
> 




---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f9/a6/a6/3b/attachment.htm

---------------------- multipart/alternative attachment--