Thanks Jon! You've been a wealth of information. Greg Newell At 02:35 PM 6/10/2002, you wrote: >At 11:11 AM 6/10/2002 -0400, you wrote: >>1) what is banding? > >Banding is the development of thicker portions of finish as a result of >overlap from spraying in only one direction > >>2) When you speak of sanding direction you mean block sanding right? I >>fail to see how sanding direction would help with a random orbit sander. > >Even with an orbital sander, overlap can cause thinner areas if the same >sanding direction orientation is kept. > >>3) what do you use to pad the surface if you get a sag? > >A soft cloth (not terry cloth) wadded into a smooth blotter. Sometimes you >get real lucky and it disappears. >Regards, > >Jon Page, piano technician >Harwich Port, Cape Cod, Mass. >mailto:jonpage@attbi.com >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Greg Newell mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC