A brass ballpoint pen refill is just the right size for this. Run a wire through it to clean it out or flush it out with water, bend it as you described and put it to work. Ted Simmons > From: Newton Hunt <nhunt@optonline.net> > Reply-To: pianotech@ptg.org > Date: Mon, 10 Jun 2002 11:04:12 -0400 > To: pianotech@ptg.org > Subject: Re: Broken string repair > > Take a piece of brass or copper tubing and bend it into a question mark (?). > You will need some way (piano wire) to prevent the tubing from collapsing. > THread the tubing under the pressure bar, stick the wire into the hole then > lift > the wire and tubing out. Neat, effective and easy. > > Newton
This PTG archive page provided courtesy of Moy Piano Service, LLC