---------------------- multipart/alternative attachment In a message dated 6/13/02 1:44:12 AM Pacific Daylight Time, A440A@AOL.COM writes: > Greetings, > Sometimes it helps to us a much longer wire than will ultimately be > necessary and to pre-bend the end of this extra length so that it "wants" > to > come back up after going under the pressure bar. Then, you cut to length > and > wind on a dummy before final installation on the pin. > Another reason I hate to work on uprights..... > Regards, > Ed Foote > Ed, I actually tried that, and I could NOT for the life of me get it through. Should have been more persistent, I guess. At least I cut the wire plenty long, which gave me plenty of margin for errors.... Thanks, Dave ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/29/60/0a/9b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC