---------------------- multipart/alternative attachment Friends, I would follow Dampp-Chaser's recommendations when installing the components. I see some rather strange variations from time to time. I figure, if the company has done research on where to place the parts for greatest effectiveness, why try to second-guess them? Regards, Clyde > P.S. I always install them as low as possible, clearing the pedal > stuff, and toward the front/kickboard. Dampp-chaser has pictures of > installations, schematics, etc., none are clipped under the keybed, > probably for some good reason (one being that lots of the heat would > run out of the crack above the kickboard and under the keybed, rather > than disperse throughout the piano more evenly). ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9f/28/12/35/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC