You might want to try an large automotive supply store. I had this problem once with an old Kawai and searched everywhere without success. It seems that it is a very special type of metric thread. I eventually went to a huge Napa auto store which also doubled as a distribution center for other stores. I bet that they could be ordered from other smaller Napa stores in your area, you would just have to wait a day or so. These had a normal hex head and not the vertical tab/hole head but they worked just fine. I'm not sure what you would use these things for in automotive applications. Rob Goodale, RPT Las Vegas, NV Eliot Lee wrote: >Hello, > > I am trying to find some old leg bolts for a Samick (1980) G-3 or >SG-185. > > They are the kind with the hole in the vertical head. > > I have 5 and need 3 more. > > Samick doesn't carry this part anymore. > > It is a 3" long 1/2 bolt with 12 threads per inch. Bolt stores say that >it should be 13 threads per inch and 12 threads per inch if the diameter is >9/16. > > I am getting the piano soon and don't know what to do. > > Any help would be appreciated. > >Thanks, Eliot Lee >
This PTG archive page provided courtesy of Moy Piano Service, LLC