At 10:14 PM 6/18/2002 -0400, you wrote: >Hi list, > I have a grand piano being sprayed black.How can you spray one side of > the lid, and turn over without messing the other side up? We had it > sitting on a blanket,and it left an indentation,after three days of > drying.We have it now sitting on finishing nails,as it will only mess up > a small area. I have never had this problem before.Everything we've > tried has left a mark on the finish. >Thanks, >Hazen Bannister Had you sprayed with PianoLac you would not have imprinting problems. Easier still is to place eye screws in the hinge screw holes and hang the lid and spray both sides, don't forget the edges.. especially the hinge end. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC