---------------------- multipart/alternative attachment In a message dated 6/21/02 2:51:08 PM Central Daylight Time, JIMRPT@AOL.COM writes: > slide two long 2X4 or 2X6 under the plate until they > are past the rim on the other side........fasten these boards so that they > are spread apart enough to balance the plate and won't move sideways away > from each other...............raise these boards until they are supporting > the plate....tilt them and sloooowly lower the plate to the > floor.................... > > Clear enough?? > I am with you until the part of "fasten the boards so that are spread apart." Fasten them to what? Then, once the plate is supported on the boards, I don't understand the part of "tilt them and sloooowly lower the plate to the floor" Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ac/95/59/39/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC