Agraffe reaming

[Ron Nossaman]

>I bet you don't have to go through all two dozen of the trichord aggraphes 
>before you run into the one you're looking for.

Nowhere near.


>That trimming is manual labor (it has to be to feel the tiny amounts of 
>trimming involved). Which is why I jumped on your trick!.
>
>Bill Ballard RPT

I used to have to re-train on the end mill every time I had a set of 
agraffes to replace. I'd get pretty good at it just about the time I 
finished. Not anymore.

Ron N