beckets

[Avery Todd]

Me too!

Avery

>Wish everyone who does it would STOP.
>----- Original Message -----
>From: "Avery Todd" <avery@ev1.net>
>To: "Pianotech" <pianotech@ptg.org>
>Sent: Thursday, August 21, 2003 4:55 AM
>Subject: Re: beckets
>
>
>I don't know about Wurlitzer but Baldwin does it.
>
>Avery
>
> >     > >I had that happen once when the top-most string tore, C8 center
> > and right.
> > >  I tried three times to replace the string, and every time as I tried to
> > > pull the string to tension, the string would slowly pull out of the
> > hole.    --
> >
> >          Thread the string through the pin, bend over about an eighth or
> > quarter-inch of wire, like Wurlitzer or whoever did on their pianos with
> > "coil-locks", or whatever they called 'em, then wind your 3 coils.
> >
> >--David Nereson, RPT
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives