>Phillip, > >If you are working on an old Steinway with assist springs, there are >several options. > >The easiest one is to make use of 'modern' shanks with the knuckles at 17 >mm distance from the center pin. I'm considering that. >If you use 'modern' hammers, you have to take some weight off from the >sides of the hammers I probably will do that. I have target hammer weights in mind. >We have done this many many times and it always worked well enough and all >clients were happy. > >There are of course other and better ways, but that is another story. A story that my client doesn't want me to tell. >friendly greetings >from >Andr� Oorebeek Thanks for the comments, Phil F
This PTG archive page provided courtesy of Moy Piano Service, LLC