This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Thanks Keith! ----- Original Message -----=20 From: Keith Roberts=20 To: Pianotech=20 Sent: Wednesday, March 05, 2003 4:09 PM Subject: Re: Old German Piaon Measure from the front of the key to the balance rail pin and from the = balance rail pin to the capstan. Divide. Should be about 2+. Less than 2 = and you might want to move the capstan line. Shaff piano supply here in = the states sells a very cheap gram weight set that will work. You can't = relead (as far as I know) without one. Keith Roberts ----- Original Message -----=20 From: Steve Martin=20 To: Pianotech=20 Sent: Monday, March 04, 2002 9:51 PM Subject: Re: Old German Piaon Hi Keith no I don't have any gram weights! I thiught about that = though and couldnt remember what the ratios were. Can you tell me?? Steve. ----- Original Message -----=20 From: Keith Roberts=20 To: Pianotech=20 Sent: Wednesday, March 05, 2003 3:02 PM Subject: Re: Old German Piaon Well, the a and the s are right next to each other so lets assume = its a restored upright from Germany. =20 Steve, measure the key ratio. Do you have any gram weights for = measuring upweight and downweight? Keith Roberts ----- Original Message -----=20 From: Robert Goodale=20 To: Pianotech=20 Sent: Tuesday, March 04, 2003 7:50 PM Subject: Re: Old German Piaon What is a German "UR" and why would one want to "reator" it? (Sorry, I must be bit punchy tonight) =20 ROb Goodale, RPT Las Vegas, NV =20 I've just partially reatored an old German UR and would love = some feedback ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/16/be/35/a5/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC