---------------------- multipart/alternative attachment In a message dated 3/13/03 2:02:10 AM !!!First Boot!!!, tomtuner@attbi.com=20 writes: > List, >=20 > I evaluated a Miller grand today 5=E2=80=9911=E2=80=9D C.1901.= Needs the whole=20 > deal at this point. This piano has one of the widest tails I=E2=80=99ve ev= er=20 > seen.Very boxy at the rear. ornate plate =E2=80=93Lots of iron! round legs= =E2=80=94nice=20 > case with lousy old ebony refinish. (Couldn=E2=80=99t detect if it was ori= g=20 > Mahogany or dare I hope rosewood ) I=E2=80=99ve serviced quite a few Mille= rs here=20 > in Mass. as they were made locally, but I don=E2=80=99t recall seeing one=20= with this=20 > shape before.=20 >=20 > I found no scale #=E2=80=99s or model letters anywhere. Anyone have any in= fo on=20 > this model? I=E2=80=99m trying to set value and /or make an offer. >=20 > Thanks >=20 > Tom Driscoll Tom =20 This will turn out to be a nice piano, but don't expect to make any money. I= t=20 will take a lot of time to rebuild the piano, but because of the name, you=20 won't be able to get what for it what it is worth. (It will be worth around=20 $15,000 -- $20,000, but you'll only get around $8,000 -- $10,000, if that=20 much.)=20 For an offer, see what they want for it, and offer half, but no more than=20 $1000. It would be better if you could get someone (private party), to buy=20 it, and offer to rebuild it. You'll have money in your hand.=20 Wim=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/79/45/84/1e/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC