>Can't find a name for the knot used in splicing -- checked the Boy Scout >Handbook, too, and didn't see it. That's because it's a tuners' knot, and the topological equivalent of a square knot. Boy Scouts deal in topography instead - and starting fires. >But it's a variation on the square knot, or a "twisted" or "reconfigured" >square knot. Right. >A square knot can be made into our splicing knot and vice versa without >untying all the way. Or at all, for that matter. >Neither the square knot or our splicing knot is 100% secure with rope -- >if pulled hard enough with some kinds of rope, they will untie. But for >some reason they work well with wire. Stiffness relative to breaking strength. There must be a descriptive engineering term, but if there is it escapes me. > Now all I need is the "official" name of the other knot (the one most > often seen in pianos). > --David Nereson, RPT, Denver "Tuners' knot". Heck, we ought to get to be in the knot books too, and that won't happen with the "I always replace the string" knot. Or knot... Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC