Sound board panel drying box

[Farrell]

How the heck much pressure are you pumping into that box????? Do you have the production needs to dry a board that fast?

Terry Farrell
  
----- Original Message ----- 
From: "Ron Overs" <sec@overspianos.com.au>
To: "Pianotech" <pianotech@ptg.org>
Sent: Wednesday, May 21, 2003 7:31 PM
Subject: Re: Sound board panel drying box


> >Ron,
> >
> >I see that this is a ribbed drying box.  Is this a rib crowned or a 
> >compression crowned drying box?
> >
> >Phil F
> >
> 
> I was waiting for that comment to turn up !! Thanks Phil.
> 
> In the case of the box I just glued them in place and held them with 
> self drilling screws. They are intended to prevent the box from 
> bulging too much under the positive pressure of the air circulation 
> fan. A straight edge check on the outside confirmed that it does 
> bulge slightly, so I'm not sorry I installed the ribs.
> 
> >The finished result can now be viewed at;
> >http://overspianos.com.au/drb1.html
> 
> Best,
> Ron O.
> 
> 
> -- 
> _______________________
> 
> OVERS PIANOS - SYDNEY
> Grand Piano Manufacturers
> 
> Web: http://overspianos.com.au
> mailto:info@overspianos.com.au
> _______________________
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives