This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Would it not be only the partials that are addressed in the "style" = data? Let's say in a case where you wanted a clean (beatless) 4:2 octave = and you specified no other partial relationships, the spinner presumably = would stop when this condition was met. Now maybe if further up the = scale you had specified a 2:1 octave, then of course I should think that = the spinner was based on a compromise between these two relationships. = But we are only talking about two different partials for targeting the = pitch of this one note. I would think that the VT, for that note, would = only be considering the two partials. Of course, in better "styles", = such as the wonderful one I have been using that was authored by you = (THANKS!!!!!), there are at least six or eight partials that the "style" = forces the VT to consider and make a compromise among those to determine = the target pitch for that note. So I guess that's my question. Isn't it the "style" thingee that = dictates which partials are incorporated to calculating target pitch? Terry Farrell ----- Original Message -----=20 From: "Ron Koval" <drwoodwind@hotmail.com> To: <pianotech@ptg.org> Sent: Wednesday, October 15, 2003 9:15 AM Subject: Verituner spinner movement > Terry Farrell asked: >=20 > Is it the more prominent partials that drive the spinner or is that = =3D > controlled by data in the "style" coding? Seems to me the style data = =3D > would dictate spinner motion (which may include data from up to 8 or = =3D > however many partials). >=20 >=20 > Hey Terry, >=20 > My understanding is that it is a blending of the usable partials based = on=20 > the strength of each heard. This from the user guide: >=20 > "The Verituner does not set a single partial and offset. The spinner = reacts=20 > dynamically to the combined targets of multiple partials of the note = you are=20 > tuning. The relative strength and weakness of the partials also = influence=20 > the mothion of the spinner. These and other variables are used by the = > Verituner's proprietary algorithm to determine the 0 point at which = the=20 > spinner stops." >=20 >=20 > In fine tune mode, there is an indication that represents the strength = and=20 > sustain of each of the partials. >=20 > Help any? >=20 > Ron Koval > Chicagoland >=20 > _________________________________________________________________ > See when your friends are online with MSN Messenger 6.0. Download it = now=20 > FREE! http://msnmessenger-download.com >=20 > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cb/77/bb/86/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC