Hi, I use the method of pre-soaking the keybushings with wallpaper remover and hot water and after that I just steam the bushings out with a similar hand held steam device with a small nozzle. Works verry fast and de wood is neat and clean for the new felt. Pierre Gevaert Belgium ----- Original Message ----- From: "Chris Gregg" <cdgregg@telus.net> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, November 30, 2004 4:55 PM Subject: RE: My old way of removing keybushings > This is what I > use. > http://www.healthgoods.com/Shopping/Household_Products/Eureka_Hot_Shot_Steam er.htm > They are inexpensive and have a ninety degree nozzle that gets right on top > of the balance rail bushings. Also great for taking off damper felt > > Chris > > > http://www.tuneit.ca > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC