balance rail holes

Farrell mfarrel2@tampabay.rr.com
Fri, 3 Dec 2004 18:09:57 -0500


This is a multi-part message in MIME format.

---------------------- multipart/related attachment

------=_NextPart_001_0081_01C4D963.4C963A80
Thanks John. Photoshop can make anything look good! (Just kidding - no =
touchup.)

I think I used basswood on these. I didn't do the whole set - just the =
ones that needed it - maybe a dozen or two. I figured basswood would =
more similar to the other keys (spruce?). Some folks use maple, but =
maybe some worry about clicks - I think the Spurlock info discusses =
that.

Yes, I used a router for the slot. Just cut the basswood pieces with a =
tad of an overhang and chisel off the edge - believe it or not, I think =
the photo shows the only one that I chiseled out a little bit extra from =
the key..... (and if you believe that, I've got some real nice real =
estate for you called Everglades Paradise!).

I followed the Spurlock article exactly (or as closely as my talents =
allowed). Below are a couple pictures of the tool that I made, per =
Spurlock. You can see the two locator dimples on the key bottom in the =
other photo.





Terry Farrell


  Nice looking job, Terry.
  What type of wood did you use?
  Did you route out the slot for the insert?
  Any pointers to follow, other than the Bill Spurlock article?
  Thank you.
  John M. Ross
  Windsor, Nova Scotia, Canada
  jrpiano@win.eastlink.ca
    ----- Original Message -----=20
    From: Farrell=20
    To: Pianotech=20
    Sent: Thursday, December 02, 2004 9:15 AM
    Subject: Re: balance rail holes


    Definately try steam first, but if that doesn't work, the Spurlock =
system works great. I did a set of keys recently that way for the first =
time with great sucess. Picture of a repair is below:



    Terry Farrell

    www.farrellpiano.com
------=_NextPart_001_0081_01C4D963.4C963A80
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/7b/2b/26/f9/attachment.htm

------=_NextPart_001_0081_01C4D963.4C963A80--

---------------------- multipart/related attachment
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 22675 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/53/b0/4a/31/attachment.jpe

---------------------- multipart/related attachment
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 14545 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/70/83/99/75/attachment.jpe

---------------------- multipart/related attachment
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 85365 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/af/14/98/8d/attachment.jpe

---------------------- multipart/related attachment--



This PTG archive page provided courtesy of Moy Piano Service, LLC