This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Yet another question, folks, I had to repin all the Steinway shanks I recently installed. When they = came, they were the best examples of perpetual motion machines I had = ever seen. Well, golly, almost all of them have loosened up again!--not = to their original state, but much looser than I find acceptable. (The = piano got used a couple of times while work was in progress.) Dang, = I've never had this happen before---am I in the twilight zone? I = couldn't believe my eyes. Would shrinking the cloth help before I = pin....again? Grrrr. Also, I was surprised the first time I repinned to find that the center = pins were all .052. That seemed sort of big for original pinning. I = replaced them with .053. Now I feel like I'm going to end up using = telephone poles to get them right. Here I thought I was almost done = with this job and now this...... :-( Help! Barbara Richmond, RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c3/d4/79/78/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC