---------------------- multipart/alternative attachment At 09:30 AM 12/13/2004 -0800, you wrote: >Terry: I found a set of nut drivers at my local hardware store that had >both sizes. I also use the adjustable tool sold in the supply catalog in >my combo handle or in a drill. I believe it is Schaff's #3333 . >Patrick C. Poulson >Registered Piano Technician >Piano Technicians Guild Also, Terry, for versatility, you can take the nut off of a shank cleaner and spread the tines a bit. Throw it in a drill or a combo handle. It won't tear 'em up too bad if you avoid rocking. Guy >----- Original Message ----- >From: <mailto:terry@farrellpiano.com>Terry >To: <mailto:pianotech@ptg.org>pianotech@ptg.org >Sent: Monday, December 13, 2004 8:56 AM >Subject: Square Nut Driver > >I'm having trouble finding square nut drivers for 1/4" & 5/16" nuts - the >rubber nuts one finds on some spinets. Any ideas? > >Supply houses don't list 'em in catalogs. McMaster-Carr doesn't seem to >have them. Haven't found anything on a google search. > >Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/18/fc/59/11/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC