I sometimes use a treble rubber mute stuck between the side of the case and the fallboard for these. Kimball grands are like this, much. James Grebe Piano-Forte Tuning & Repair Creator of Handsome Hardwood Caster Cups (314) 608-4137 WWW.JamesGrebe.com 1526 Raspberry Lane Arnold, MO 63010 BECOME WHAT YOU BELIEVE! pianoman@accessus.net ----- Original Message ----- From: "Alan" <tune4u@earthlink.net> To: "'Pianotech'" <pianotech@ptg.org> Sent: Thursday, December 16, 2004 7:51 PM Subject: RE: fallboard flop > Yes. Some Baldwins, in particular, will try to kill you this way. If > fallboards are the type that just lift out, I usually do. Your idea is > better! Thanks. > > Alan R. Barnard > Salem, MO > > > -----Original Message----- > From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On > Behalf > Of Hazen Bannister > Sent: Thursday, December 16, 2004 6:04 PM > To: Pianotech > Subject: fallboard flop > > > Hi, > When tuning a grand piano, I sometimes lean my arm on the front rim of > the piano, and the fallboard will often fall down, or flop back and > forth. I got a small clamp ( C style ) from sears, and using felt to > keep from scratching the piano, you can clamp the fallboard at the top > to the rim of the piano, and presto, no more fallboard flop. Best, Hazen > Bannister _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > > --- > Incoming mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.813 / Virus Database: 553 - Release Date: 12/13/2004 > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.813 / Virus Database: 553 - Release Date: 12/13/2004 > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC