lid construction

Erwinspiano@aol.com Erwinspiano@aol.com
Tue, 3 Feb 2004 01:26:29 EST


---------------------- multipart/alternative attachment
In a message dated 2/2/2004 8:45:52 PM Pacific Standard Time, 
ANRPiano@aol.com writes:
In a message dated 2/2/2004 7:19:39 PM Pacific Standard Time, 
tune4@earthlink.net writes:
Just curious: how do you plan to "glue" the veneer to the core?  Do you have 
a press rigged up, use contact cement, use a hot glue method, or use hot hide 
glue?
I am getting to this now.  I have two choices, my first would be a vacuum 
press, but I will need a larger bag than I have now, I can do an 8 x 4, but need 
8.5 x 5.5 to have a comfortable fit.

I have had mixed results with wood glues and vacuum presses, I will 
experiment first. If I can get it to work Tite bond would be my choice because of the 
open time.

I may rig my pneumatic soundboard press for this, but I may have to make some 
modifications to accommodate the thickness of core, veneer, and caul.

On such a large surface I was thinking the paper backed would be easier to 
work with than standard veneer.  I will probably cross band it, simply to be on 
the safe side.

As far as laying up the core, it has been a simple matter of cutting down the 
larger pieces of material, alternating grain, planing, edgeing, glueing two 
pieces together at a time and trying to keep everything as flat as possible.  I 
have used bisquets through the first two assembly stages, while these are 
handy for alignment, I think some of my alignment problems can be traced to the 
biscuits.  So the bisquest have been a mixed blessing.

I will see about pictures.

Andrew Remillard
 Andrew-I believe its possible to coat both veneer & lid with thin Hot hide 
or is it tight bond, anyway & then Iron it firmly into place. I'll check with 
Bob Davis. I think he & Marcia have done this a few times. This would be way 
simpler than what I'm hearing proposed.



Dale Erwin
Erwins Piano Restorations
4721 Parker Rd, Modesto, Ca. 95357
erwinspiano@aol.com

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2c/47/91/77/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC