---------------------- multipart/alternative attachment Hi All, Is it possible for jack center pins to be bent on a hard blow? I service a Bergman TG150 (5'0") that is played very hard, and some of the jack pinning is getting tighter. At first I thought it might be tight bushings or an adult beverage spilled inside (bar scene), but I'm thinking the pins may be bending. The piano is 7 months old. I don't think the problem is a pin plating problem or graphite in the bushing felt. Dave Davis ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/54/2d/87/c3/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC