This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment #317 on my site below Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: David Love=20 To: 'Pianotech'=20 Sent: Tuesday, November 16, 2004 7:27 PM Subject: RE: Replacing plastic elbows Are you sure they are not brittle. Usually you can break them easily = with a pair of pliers. =20 =20 David Love davidlovepianos@comcast.net=20 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On = Behalf Of Arthur Chickering Sent: Tuesday, November 16, 2004 6:17 PM To: pianotech@ptg.org Subject: Replacing plastic elbows =20 Dear List, I am replacing all the plastic drop action elbows on a Winter spinet. = I have 40 elbows which are not brittle and have to be removed in some = way other than breaking them off. Is there an easier way to do this = other than removing the whippens and pushing out each center pin? Thanks for your help, Arthur Chickering ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/72/b3/dd/a7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC