Replacing plastic elbows

James Grebe pianoman@accessus.net
Wed, 17 Nov 2004 06:20:33 -0600


This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
not that I know of
James Grebe
Piano-Forte Tuning & Repair
Creator of Handsome Hardwood Caster Cups
(314) 608-4137
WWW.JamesGrebe.com
1526 Raspberry Lane
Arnold, MO 63010
BECOME WHAT YOU BELIEVE!
pianoman@accessus.net
  ----- Original Message -----=20
  From: Arthur Chickering=20
  To: pianotech@ptg.org=20
  Sent: Tuesday, November 16, 2004 8:16 PM
  Subject: Replacing plastic elbows


  Dear List,
  I am replacing all the plastic drop action elbows on a Winter spinet.  =
I have 40 elbows which are not brittle and have to be removed in some =
way other than breaking them off.  Is there an easier way to do this =
other than removing the whippens and pushing out each center pin?
  Thanks for your help,
  Arthur Chickering
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/62/01/f0/83/attachment.htm

---------------------- multipart/alternative attachment--



This PTG archive page provided courtesy of Moy Piano Service, LLC