Britt! Stop! Wait!
I said I'd call my customer who has the last
actual set APSCO sold, and I will! Tomorrow! And
remind me if I forget again !!!!! You'd probably be
much better off using one of these for a template.
!!!!!! Thump !!!!!!
--- Britt West <brittsam@charter.net> wrote:
> I posted several months ago about finding some
> action brackets for
> a J & C Fischer grand that had the pot metal
> expanding brackets. I
> decided to take the least deformed one to a machine
> shop for
> duplication. The machinist said that it would lower
> my cost
> considerably if he could make them out of aluminum
> as it is easier to
> cut. Is aluminum stable enough? Many modern
> brackets seem to be a
> lightweight alloy of some kind. He is going to call
> me back on Friday
> 11/18/04 and let me know about the price and if he
> can make them. I
> will run a trial set to make sure the dimensions are
> correct and then
> he will have it programed into his computer. In
> theory I could have
> sets made up as needed. If anyone is interested in
> getting some let me
> know.
>
> Britt West
>
>
>
> _______________________________________________
> pianotech list info:
> https://www.moypiano.com/resources/#archives
>
__________________________________
Do you Yahoo!?
Meet the all-new My Yahoo! - Try it today!
http://my.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC