Epoxy/bridge pins application

[Ron Nossaman]

>Joe
>Read your method after I responded.  Granted, what I described can be 
>messy.  One needs to be judicious with the epoxy.  Preheating the epoxy 
>after mixing allows it to be drizzled into place, and speeds up the cure 
>which can be helpful. Clean up is easy with a sharp chisal when the epoxy 
>reaches a stiff gum state; acetone to follow, but be careful not to wash 
>out the cracks.
>
>Paul C

Cleanup's not that hard with a dry brush as you proceed either, while the 
epoxy's still liquid.

Ron N