I need a small sample of delignit for an experimental setup. I wonder if one of you kind souls who installs pinblocks might have an offcut lying around in the shop that you wouldn't mind passing on to me. A piece with about 4" on at least one dimension would be adequate for the intended use. An offcut of some non-delignit pinblock material would also be nice to have for testing. Stephen -- Dr Stephen Birkett Associate Professor Department of Systems Design Engineering University of Waterloo Waterloo, Ontario Canada N2L 3G1 E3 Room 3158 tel: 519-888-4567 Ext. 3792 fax: 519-746-4791 PianoTech Lab Room E3-3160 Ext. 7115 mailto: sbirkett[at]real.uwaterloo.ca http://real.uwaterloo.ca/~sbirkett
This PTG archive page provided courtesy of Moy Piano Service, LLC