Spinet horizontal side separation

[Terry]

Your drawing depicts a pretty straight-forward normal (-ish) construction.
Little doubt in my mind that the side should be glued to the back.

Terry Farrell


> Yet, Terry, you are correct.  I attached a
> back-of-the-envelope sketch to define "horizontal
> side" and "vertical side".  What has come loose is the
> upper "horizontal side, which really is also the
> keybed support.  It is one slab, attached to the edge
> of the back (presumably with glue) and to the lower
> "vertical side" with two little angle brackets.
>
> Greg Graham