Spinet horizontal side separation

[Ron Nossaman]

>Yet, Terry, you are correct.  I attached a
>back-of-the-envelope sketch to define "horizontal
>side" and "vertical side".  What has come loose is the
>upper "horizontal side, which really is also the
>keybed support.  It is one slab, attached to the edge
>of the back (presumably with glue) and to the lower
>"vertical side" with two little angle brackets.
>
>Greg Graham


I've done this a time or two, on site. A steel spatula, a bottle of 
Original Titebond, a few pipe clamps, some padding, a drop cloth, and a 
roll of paper towels. Apply all items as necessary, and come back tomorrow 
for your clamps and drop cloth.

Just another day in the trenches.

Ron N