This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment ----- Original Message -----=20 From: PAULREVENKOJONES@aol.com=20 To: pianotech@ptg.org=20 Sent: Saturday, June 25, 2005 8:22 PM Subject: Re: Piano wire tensile strength In a message dated 6/25/2005 8:48:50 PM Central Standard Time, = cmpiano@comcast.net writes: It's elementary, my dear Watson. Twisting the wire work hardens it = and=20 therefore it is stronger. Anyway, that's as good as any for a = reason. Carl: Twisting (unless it were to be 20 or 30 times perhaps) doesn't even = approach "work-hardening" or the duplex deformation properties of metal = which is bent past a point in the curve of elasiticity. So....not as = good a reason as any. :-) Paul R-J=20 Paul, I was just being funny, but if 30 turns approaches "work = hardening" then with 3 you're ten percent on the way. BTW, I had a 7 ft Hardman that I put on new strings. The bass strings = I'd put on (made by brand X) were not good. I'd decided to have them = made over by brand ? but when I tried twisting them 3 full turns they = shaped up nicely. =20 One comment about twisting strings that dawned on me. Judge the = number of turns (if you want to do it) by the length of the string. = Obviously a long string can tolerate more twists. Like we need a spec = on number of twists per foot. Carl Meyer PTG assoc Santa Clara, Ca. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/3b/51/76/63/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC