This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I'm using a power winch with two extra pulleys to step down the line speed, Christian Bolduc's plate pulling tool, pipe insulation taped to the rim, and 1/2" or 3/8" hardwood dowels in plate screw holes to guide the plate. My future plan is to attach thick buckskin or fabric to the pipe insulation and create sections of 'skirting' that I can reconfigure for each piano. Best regards, Brad Smith, RPT www.smithpiano.com How do you protect the inside of the rim while you are cycling the plate in and out. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/22/16/94/72/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC