Chunks of thick scrap vinyl upholstery material from the fabric store. These are also a LOT more convenient to use than cloth pads for restringing protection, moving, etc.. Thump --- Brad Smith <staff@smithpiano.com> wrote: > I'm using a power winch with two extra pulleys to > step down the line speed, > Christian Bolduc's plate pulling tool, > pipe insulation taped to the rim, > and 1/2" or 3/8" hardwood dowels in plate screw > holes to guide the plate. > > My future plan is to attach thick buckskin or fabric > to the pipe insulation > and create sections of 'skirting' that I can > reconfigure for each piano. > Best regards, > > Brad Smith, RPT > www.smithpiano.com > > > How do you protect the inside of the rim while you > are cycling the plate > in and out. > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC