---------------------- multipart/alternative attachment Baldwin vertical rails are suspended by screws. The holes in the rail at the B flats (usually) are to access screw slots to raise the rail. Loosen the hold-down screws and turn the support screw up or down and resecure the hold-down screw. No shimming required. Regards, Jon Page ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c0/25/1e/92/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC