This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment David Love said: "No, I just use the string grooves themselves as the = guide. Sand until they just disappear. Recheck the bearing and make adjustments to the plate if necessary. " That's all well/good, however, it assumes that the bridge hasn't = "rolled" and also that the bridge was made correctly in the first place. If you ascertain that the bridge hasn't rolled then a quick check with a = small Square will tell you if you are on track. If the bridge has rolled = then you need to compensate. in that case, set up with a "T-Square" will = give you the correct angle. Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/49/cd/5b/60/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC