Typically 1890's German pianos. On a very hard blow this setup would tend to break keys. With that back rail, I don't know how they regulated the key dip. AF ----- Original Message ----- From: "Michael Gamble" <michael@gambles.fsnet.co.uk> To: "'John Delmore'" <johndelmore@cox.net>; <pianotech@ptg.org> Sent: Sunday, September 04, 2005 9:26 AM Subject: RE: No front rail punchings either > Hello List > If this contribution gets through without being hurled back as > "suspicious" > by "owner-pianotech-ptg etc" I have often come across upright pianos with > no > front rail punchings. Reason? There's a suspended rail over the tail end > of > the keyframe. The keys hit this instead. > Regards from a Sunny early morning in The Village. Coffee Vicar? > Michael G.(UK) > > -----Original Message----- > From: John Delmore [mailto:johndelmore@cox.net] > Sent: 04 September 2005 03:13 > To: pianotech@ptg.org > Subject: Balance rail punchings > > Hi all: > Today, I got into the Brinkerhoff "lab" piano--just a thourough cleaning > right now. I noticed that there are no felt punching on the balance rail: > is this common for circa 1925 pianos (sn 114743 if any of you kind folks > have an atlas handy)? I'm guessing I shouldn't "add" felts where I don't > find them. > John Delmore > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC