repetition spring slot

[Barbara Richmond]

My thoughts exactly, David.

br
  ----- Original Message ----- 
  From: David Ilvedson 
  To: pianotech at ptg.org 
  Sent: Friday, July 07, 2006 1:55 AM
  Subject: RE: repetition spring slot


  <snip> but do you/customer really want to remove the felt and deal with glue residue and whatever?   I'd see if the piano works reasonably well as it is...i.e.no friction problems... <snip>

  David Ilvedson, RPT
  Pacifica, California





------------------------------------------------------------------------------
  Original message
  From: "Barbara Richmond" 
  To: Pianotech 
  Received: 7/6/2006 8:00:46 PM
  Subject: repetition spring slot


  Howdy all,

  OK, I'll admit it, I've lived a protected life and have hardly ever worked on old grands.  I have a friend--I can't believe she did this-- who bought a tiny, old (1908) refinished and re-whatevered Kimball grand.  She got it and THEN she called me.  Ahem.  Well, the finish job is quite good, the stringing job a little less than mediocre and the dampers are a mess, but work better than the action. Yikes. The one redeeming thing is whoever did the work, used some Abel prehung hammers--so I believe I can count on those being right.

  While looking things over, I noticed that there was felt in the repetition spring slot.  Just wondering if any company ever actually used felt in that slot or some-buddy was trying to solve a noise or gunk problem.   I suppose it's a case of the latter, since the felt didn't seem quite at a dirty and petrified as the other action felts/cloth.   I meant to weigh off a sampling of notes to check for friction, but I was running low on time and got distracted.

  Thanks,

  Barbara Richmond, RPT
  near Peoria, IL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060707/603b01fb/attachment.html