Pinblock Repair

[J Patrick Draine]

On 7/15/06, Alan R. Barnard <tune4u at earthlink.net> wrote:
> What CA? Replacing strings, just put in the larger pins. Since it had #1s, 3s or maybe 4s should be tight--maybe some reaming for consistence would be a good idea.
>
> Alan Barnard

>From Clark Sprague's original post:

"Then I talked to the wife, and was able to get a little farther with
her, a new set of Arledge bass strings, with CA the block, file
hammers, a little regulation, etc."

Patrick Draine