finished my lever

[William R. Monroe]

Well..............

If you work for the government, close enough.

Turned the knob end myself, yep.
Epoxied onto a 1/2" round titanium shaft, 9-1/2" in length.
Shaft was threaded for me (thanks Charles Faulk).
Coleman 20 degree.
#2 Hale tip
Knob is about 2-3/8" diameter.
Overall length of lever is 10-1/4" (end of ball to end of head).

Regards,
William R. Monroe


----- Original Message ----- 
From: "Joe And Penny Goss" <imatunr at srvinet.com>
To: "Pianotech List" <pianotech at ptg.org>
Sent: Monday, July 17, 2006 9:02 AM
Subject: Re: finished my lever


> Hi William,
> Let me see if I have this correct.
> You have a knob end that you  turned yourself, epoxied onto a steel 3/8"
> round 8" shaft.
> The shaft you threaded with a tapered 1/8" pipe thread and used a Coleman
> 20% head and # ? Watkanabe tip.
> How close did I come?
> Joe Goss RPT
> Mother Goose Tools