finished my lever

[Joe And Penny Goss]

Nice and stiff.
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "William R. Monroe" <pianotech at a440piano.net>
To: "Pianotech List" <pianotech at ptg.org>
Sent: Monday, July 17, 2006 1:30 PM
Subject: Re: finished my lever


> Well..............
>
> If you work for the government, close enough.
>
> Turned the knob end myself, yep.
> Epoxied onto a 1/2" round titanium shaft, 9-1/2" in length.
> Shaft was threaded for me (thanks Charles Faulk).
> Coleman 20 degree.
> #2 Hale tip
> Knob is about 2-3/8" diameter.
> Overall length of lever is 10-1/4" (end of ball to end of head).
>
> Regards,
> William R. Monroe
>
>
> ----- Original Message ----- 
> From: "Joe And Penny Goss" <imatunr at srvinet.com>
> To: "Pianotech List" <pianotech at ptg.org>
> Sent: Monday, July 17, 2006 9:02 AM
> Subject: Re: finished my lever
>
>
> > Hi William,
> > Let me see if I have this correct.
> > You have a knob end that you  turned yourself, epoxied onto a steel 3/8"
> > round 8" shaft.
> > The shaft you threaded with a tapered 1/8" pipe thread and used a
Coleman
> > 20% head and # ? Watkanabe tip.
> > How close did I come?
> > Joe Goss RPT
> > Mother Goose Tools
>
>