Gordon, Try Schaff catalog page 107, No. 545 upper right column. Drive it in and bend it at the proper spot. A possible "field" repair is to use a nail and JB Weld it into place. Dave Davis, RPT Date: Wed, 26 Jul 2006 10:07:21 -0400 From: "Gordon Holley" <gwholley at hi-techhousing.com> Subject: Kimball Console-broken damper rod hook To: "Pianotech" <pianotech at ptg.org> Message-ID: <029e01c6b0bc$cfe7e820$6700a8c0 at gholley> Content-Type: text/plain; charset="iso-8859-1" List. I'm servicing a Kimball Console, and have a broken damper rod hook. This hook broke off right below the entry into the rod. This hook is the one located just prior to the bass lift rod "coupler" (overlap). Are there damper rod hooks available from some source or from a tech on the list? Schaff catelog does not show any. Can one hook in the middle of the rod, (there are two others in the middle and one at the far right end near the lever), be removed and relocated where the broken one now is located? Can a new hook be made by someone? Are there any suggestions from tech's on this problem? Many thanks in advance. Gordon Holley Associate Indiana Chapter 467 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060726/b52387cb/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC