James - I do not understand what you mean by "recalibrate to minimize runout". Sounds like some sort of basic drill press tuning that I obviously don't have a clue about. I do know what runout is, but I don't know anything about runout calibration. Please educate me! Thanks. Terry Farrell ----- Original Message ----- From: James H Frazee A couple of things to remember/consider: 1. The current (and intended future) moisture content of your new maple strips. What's snug now might not be in February. 2. If you're using a floor drill press, maybe recalibrate to minimize runout. If benchtop, definitely recalibrate to get as close to zero runout as possible. Arrrgh. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060726/9f6cf7d2/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC