Steinway Accelerated balance rail bearings

Conrad Hoffsommer hoffsoco at luther.edu
Fri Jun 2 03:21:13 MDT 2006


At 01:27 6/2/2006, you wrote:

>I'd look carefully at all the black lined pieces and see if you see 
>a pattern, i.e like you say, hole slightly shifted to the 
>front...then go with it...I don't see it being much of a 
>factor...use what your unsure of in the bass...
>
>David Ilvedson, RPT
>Pacifica, California
>

I think that they are supposed to be assymetrical to assist the 
"acceleration".  In theory, with the hole shifted to the front, the 
key is automatically going downhill when played.  Also 
theoretically... with a flat platform/punching, as you play the key, 
the balance point moves toward the player side of the punching and 
the key actually rises up on the balance pin.   I can imagine that 
the harder/thinner the punching/key bottom, the more likely this 
effect is to move from theoretical to actual.

How much this effect actually matters? Dunno.



Conrad Hoffsommer

Early to rise: early to bed;
Makes a man healthy, and socially dead.




More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC