George, IMO, it's only a temporary fix! Until the customer can save up enough money to do it correctly! Avery Todd University of Houston At 10:54 AM 6/23/2006, you wrote: >Ben, >I have had the same experience with turned front rail pins. The >immediate response appears to give excellent results, the key does >feel tighter,nicer to play and the keys are nicely spaced. However, >my experience has been that after some time these keys started to >stick, humidity must have come into play here and I ended up >putting the pin back basically to where it was. Maybe a new set of >key bushings would have been the safest fix. > >Regards >George >Piano Tech . NL, Can > >Keep That Piano Tuned UP......... > >-----Original Message----- >From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] >On Behalf Of Ben J >Sent: Thursday, June 22, 2006 11:00 PM >To: pianotech at ptg.org >Subject: Re: Pianotech Digest, Vol 1276, Issue 119 > >"Is there a down side to this. Am I missing something? > >Tom - If you are going to turn front rail pins to take up slack in a >worn key bushings I would suggest leaving the key with just a little >more slack than you would normaly like to feel. I have traced the >cause or more than one sticking key to a turned front rail pin, ( >some of which I have turned myself). Sometimes for what ever reason >the bushing tightens up on the turned pin after you leave the house >of course and the key starts sticking. Just a thought- Ben E Johnston RPT > > > > >---------- >From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] >On Behalf Of Tom Sivak >Sent: Thursday, June 22, 2006 10:31 AM >To: pianotech >Subject: twisting front rail key pins > >List > >I've always been told, "Don't twist the front key pins to eliminate >side motion on keys that have the key bushings worn out." And I've >always accepted that. > >Last week I was at a composer/friend's house. He has a 1930s >Kimball grand, really worn out. I did a full regulation on the >piano, and he didn't want to pay for new key bushings, so I twisted >them, and the difference is wonderful. No side play on the keys, >feels like a million bucks. > >Now I understand it would be unethical to do that to a piano and >then sell it, hiding a problem, but what's wrong with improving the >play of a piano by doing the same? Sure, it may accelerate wear on >the bushings, but the bushings are worn out now! They need >replacing already. All this does is extend the deadline and make >the piano play much better until D Day comes. > >Am I missing something? What's the down side to this? > >Tom Sivak >Chicago > > > >Yahoo! Sports Fantasy Football '06 - Go with the leader. ><http://us.rd.yahoo.com/evt=33539/*http:/football.fantasysports.yahoo.com?ovchn=YAH&ovcpn=Integration&ovcrn=Mail+footer&ovrfd=YAH&ovtac=AD>Start >your league today! > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.1.394 / Virus Database: 268.9.2/372 - Release Date: 6/21/2006 > >-- >No virus found in this outgoing message. >Checked by AVG Free Edition. >Version: 7.1.394 / Virus Database: 268.9.2/372 - Release Date: 6/21/2006 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060623/da76cf84/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC